JBL CBT1000 | Søjle, 24xDis+6xBas, Styrbar, 1500W, IP55, M. drej/kip beslag, Sort

Med den helt nye JBL CBT serie, er der mulighed for at justere spredning ift tale eller musik efter behov. CBT 1000 leverer høj lydkvalitet i jævn frekvens spredning. Constant Beamwidth teknologien sikrer super taleforstålighed og musikgengivelse uden sammenligning.
Loading...
Leverandør: JBL
Septons varenummer: 801-01014
Leverandør varenummer: CBT 1000
Produkt specifikationer
The CBT1000 represents the next-generation in pattern control consistency utilizing adjustable vertical coverage and a tapered horizontal waveguide to increase the versatility of aiming the coverage of the loudspeaker to more accurately map to the room geometry in a wide variety of listening spaces.

The two-way coaxial design provides a wide 45 Hz – 20 kHz bandwidth. The low-diffraction baffle eliminates frequency response irregularities that could otherwise occur due to baffle discontinuities. The thick, heavy-duty aluminum grille allows for rust-free installation outdoors. At 102 cm (40.2 in) tall and only 25 cm (9.9 in) wide, the design fits well with virtually any architectural décor. 

Constant Beamwidth Technology, switchable between 4 "pattern up" and 4 "pattern down" vertical coverages (for total of 16 settings, music (flat)/speech switch, 4 ohms, 45 Hz – 20 kHz, 1500W cont pink (6000W peak), two-part wall bracket included. 

Features
  • Asymmetrical vertical coverage sends more sound toward far area of room to make front-to-back sound levels more consistent.
  • Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and six (6) 165 mm (6-1/2”) high-excursion LF drivers arranged coaxially.
  • Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out of coverage lobing.
  • Vertical pattern coverage is individually adjustable through a range of four (4) “Pattern Up” angles and four (4) “Pattern Down” coverage angles for a total of sixteen (16) different coverage combinations, all without the use of external DSP processing.
  • Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw) delivering superior coverage in both the front and rear corners of a room.
  • Single-speaker room coverage at high SPL, with little over-splash and strong bass response down to below 40 Hz.
  • Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
  • Swivel (pan)/tilt wall bracket included.
The CBT1000 represents the next-generation in pattern control consistency utilizing adjustable vertical coverage and a tapered horizontal waveguide to increase the versatility of aiming the coverage of the loudspeaker to more accurately map to the room geometry in a wide variety of listening spaces.

The two-way coaxial design provides a wide 45 Hz – 20 kHz bandwidth. The low-diffraction baffle eliminates frequency response irregularities that could otherwise occur due to baffle discontinuities. The thick, heavy-duty aluminum grille allows for rust-free installation outdoors. At 102 cm (40.2 in) tall and only 25 cm (9.9 in) wide, the design fits well with virtually any architectural décor. 

Constant Beamwidth Technology, switchable between 4 "pattern up" and 4 "pattern down" vertical coverages (for total of 16 settings, music (flat)/speech switch, 4 ohms, 45 Hz – 20 kHz, 1500W cont pink (6000W peak), two-part wall bracket included. 

Features
  • Asymmetrical vertical coverage sends more sound toward far area of room to make front-to-back sound levels more consistent.
  • Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and six (6) 165 mm (6-1/2”) high-excursion LF drivers arranged coaxially.
  • Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out of coverage lobing.
  • Vertical pattern coverage is individually adjustable through a range of four (4) “Pattern Up” angles and four (4) “Pattern Down” coverage angles for a total of sixteen (16) different coverage combinations, all without the use of external DSP processing.
  • Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw) delivering superior coverage in both the front and rear corners of a room.
  • Single-speaker room coverage at high SPL, with little over-splash and strong bass response down to below 40 Hz.
  • Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
  • Swivel (pan)/tilt wall bracket included.
Lars ChristensenHenrik Foldager
Lars Christensen
Pro Audio Salg

Tlf. direkte: 87 36 20 76
Mobil: 29 39 66 46
Mail: lars@septon.dk
Henrik Foldager
Pro Audio Salg

Tlf. direkte: 87 36 20 73
Mobil: 29 39 81 75
Mail: henrik@septon.dk
Produkt specifikationer
*
*
*
Kunder der har købt denne vare købte også

JBL CBT1000E | Bas Extension, sort

801-01016
Extension til JBL CBT1000 i sort. Bruges sammen med CBT1000 for at forbedre bass responsen og få en bedere kontrol på den vertikale spredning.

JBL AC895 | AE Exp. 8", Horn 90x50. 400W prog. Fly. U/ beslag. Sort

801-02100
8" 2-way full-range system, rotatable 90? x 50? waveguide coverage pattern with 2414H-C 25mm (1 in) exit, 25mm (1 in) voice coil. Priced as each.

AMX NMX ATC N4321 | AVOIP Audio Transceiver

839-00017
SVSI's N4321 audio transceiver kan både inserte og udtage lyd fra dit SVSI system.Man tilkobler blot sin lydkilde til Audio in, og den bliver automatisk konverteret til en ip streamsom kan modtages i SVSI enhederne i installationen. Der er derudover i N4321 mulighed for brug af en GPI samt to relæfunktioner til eksempelvis styring afekstern relæboks.
Filters
Sort
display