JBL AWC82-BK | sort, 8", 2-vejs co-axial, 250W, 120 x 120 grad

HF Compression Driver. 120 X 120 graders spredning. 250W power handling. 8 ohm eller 70/100V via indbygget 200W multi-tap transformer.
Loading...
Leverandør: JBL
Septons varenummer: 801-02601
Leverandør varenummer: AWC82-BK
Produkt specifikationer
Kompakt all weather højttaler med 8 LF. JBLs nye AWC højttaler serie består foreløbigt af to modeler AWC82 og AWC129. Begge modeller har det til fælles, at de har god kastelængde, jævn frekvensrespons og høj følsomhed, som sikre højopløseligt musik/tale reproduktion til udendørs installationer.

Features
  • Highly weather-resistant IP56 rating
  • Consistent 120° x 120° broadband pattern control
  • Components:
    • 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil.
    • 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.
  • Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
  • High-power passive crossover network.
  • Overload protection
  • 80 Hz – 20 kHz frequency response.
  • 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.


Frequency Response (-10dB)80 Hz – 20 kHz
Frequency Response (±3 dB)100 Hz – 20 kHz
Coverage Pattern120° x 120°
Directivity Factor (Q)8.1 (1 k – 16 kHz)
Directivity Index (DI)8.4 dB (1 k – 16 kHz)
System Power Rating250 W 2 hrs. 200 W 100 hrs
Sensitivity (2.83V @ 1m)94 dB (Ave. 100 Hz – 20 kHz)
Maximum SPL (1m)Direct 8Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB
Crossover Network1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
Nominal Impedance8 ohms
Transformer Taps70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50W
LF DriverKevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
HF Driver25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
HF Driver ProtectionMinimum audibility SonicGuard™ HF overload protection
EnclosureABS with Glass enclosure, heavily braced
AttachmentTwo M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
GrilleCorrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Input ConnectionCE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
EnvironmentalIP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).
Dimensions300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet 331 mm (13.0 in) including gland nut 359 mm (14.2 in) including bracket extending to back
ColorsAvailable in gray (similar to Pantone 420C) and black (-BK)
Net Weight (each)9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Shipping Weight14.1 kg (31.0 lb)
Included AccessoriesU-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.
Crossover ModesPassive
Nominal LF Driver Impedance8 ohms
Suspension AttachmentTwo M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
Kompakt all weather højttaler med 8 LF. JBLs nye AWC højttaler serie består foreløbigt af to modeler AWC82 og AWC129. Begge modeller har det til fælles, at de har god kastelængde, jævn frekvensrespons og høj følsomhed, som sikre højopløseligt musik/tale reproduktion til udendørs installationer.

Features
  • Highly weather-resistant IP56 rating
  • Consistent 120° x 120° broadband pattern control
  • Components:
    • 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil.
    • 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.
  • Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
  • High-power passive crossover network.
  • Overload protection
  • 80 Hz – 20 kHz frequency response.
  • 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.


Frequency Response (-10dB)80 Hz – 20 kHz
Frequency Response (±3 dB)100 Hz – 20 kHz
Coverage Pattern120° x 120°
Directivity Factor (Q)8.1 (1 k – 16 kHz)
Directivity Index (DI)8.4 dB (1 k – 16 kHz)
System Power Rating250 W 2 hrs. 200 W 100 hrs
Sensitivity (2.83V @ 1m)94 dB (Ave. 100 Hz – 20 kHz)
Maximum SPL (1m)Direct 8Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB
Crossover Network1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
Nominal Impedance8 ohms
Transformer Taps70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50W
LF DriverKevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
HF Driver25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
HF Driver ProtectionMinimum audibility SonicGuard™ HF overload protection
EnclosureABS with Glass enclosure, heavily braced
AttachmentTwo M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
GrilleCorrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Input ConnectionCE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
EnvironmentalIP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).
Dimensions300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet 331 mm (13.0 in) including gland nut 359 mm (14.2 in) including bracket extending to back
ColorsAvailable in gray (similar to Pantone 420C) and black (-BK)
Net Weight (each)9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Shipping Weight14.1 kg (31.0 lb)
Included AccessoriesU-bracket, matches loudspeaker color (gray or black), zinc-rich extrathick powder coated, steel.
Crossover ModesPassive
Nominal LF Driver Impedance8 ohms
Suspension AttachmentTwo M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
Lars ChristensenHenrik FoldagerJohnny Andreasen
Lars Christensen
Pro Audio Salg

Tlf. direkte: 87 36 20 76
Mobil: 29 39 66 46
Mail: lars@septon.dk
Henrik Foldager
Pro Audio Salg

Tlf. direkte: 87 36 20 73
Mobil: 29 39 81 75
Mail: henrik@septon.dk
Johnny Andreasen
Pro Audio Salg

Tlf. direkte: 87 36 20 71
Mobil: 29 39 31 11
Mail: johnny@septon.dk
Produkt specifikationer
*
*
*
Filters
Sort
display