König & Meyer

Vis som Gitter Liste
Sorter efter

K&M 26791 | Design monitor stand  H 644 - 1044 mm

310-00452
Impressive steel stand for monitors with stable, elegant cast base 480 x 480 mm. The large-dimensioned tube combination is gradually height adjustable by means of a spring-loaded clamping knob from 644 to 1044 mm. Depending on the size of the monitor, three different bearing plates 26792 can be mounted.

K&M 26792 | Design monitor stand topplate 240 x 200 mm

310-00454
Bearing plate for monitors, suitable for the design monitor stand 26795. Includes 4 spikes and 4 rubber knobs

K&M 26792 | Design monitor stand topplate 320 x 280 mm

310-00455
Bearing plate for monitors, suitable for the design monitor stand 26795. Includes 4 spikes and 4 rubber knobs.

K&M 26792 | Design monitor stand topplate 420 x 380 mm

310-00456
Bearing plate for monitors, suitable for the design monitor stand 26795. Includes 4 spikes and 4 rubber knobs.

K&M 26793 | Design monitor stand adapter til 35 mm rør

310-00457
Adapter for design monitor stand 26795 to mount audio monitors and loudspeakers with 36 mm flange bushing. Comes with 2 fastening screws

K&M 26795 | Design monitor stand H 794 - 1344 mm

310-00453
Impressive steel stand for monitors with stable, elegant cast base 480 x 480 mm. The large-dimensioned tube combination is gradually height adjustable by means of a spring-loaded clamping knob from 794 to 1344 mm. Depending on the size of the monitor, three different bearing plates 26792 can be mounted.

K&M 28075 | Stativ for mindre mikserpult

310-00304
Heavy duty stand for amplifiers and mixers. Foldable. Spring-loaded locking bolt and locking screw. Felt-lined supporting brackets.

K&M 28130 | stativ for guitarforsterker

310-00303
The amp stand can hold monitors, amps or other equipment to a max. weight of 35 kg without a problem. The angled front legs have significantly improved the stand’s stability and strength. The low centre of gravity ensures even larger amps are securely displayed. The fine adjustment on the supporting leg allows a tilt between 15° and 28°. A microphone can be attached to the telescopic tube using a boom arm with a thread of either 3/8“ or 5/8“. Folds compactly.

K&M 28483 | Rackhylde 19" 3U

310-00032
Easy-to-install shelf for various components, black. 3 space unit.

K&M 293 | Bordfod til svanehals med 3-pin XLR

310-00030
Black cast-iron base with a horizontally mounted XLR-style female socket on upper face. Removable plate, suitable for fitting switches, indicators, controls or connectors, with access to space for additional circuitry. Base is fitted with rear-mounted 3-pole XLR male connector.

K&M 29375 | Bordfod til svanehals med 3-pin XLR, med on/off switch

310-00029
Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, crackle-free switching, with phantom powering-pilot light, with switch (gray). Two diodes indicate the operating state (voltage / microphone ON/OFF).

K&M 29376 | Bordfod til svanehals med 3-pin XLR

310-00028
Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, without pushbutton or switch.

K&M 40900 | Bordrack 8U

310-00026
19" standard 8 unit-rack desk stand. Sturdy U-profile with steel rack rails. Comes with 16 cage nuts and screws.

K&M 42020 | Rackvogn 12U + 9U

310-00025
Heavy-duty steel construction. Four casters, two lockable. Angle adjustable to 45° with spring-loaded locking mechanism. 12 space units in top section, 9 in lower section. Cage nuts incl. (32 pcs.). Rack shelves, drawers, blank and ventilation panels are available.

K&M 42040 | Stativ for mikser

310-00302
Sturdy aluminum construction. Folds flat. Adjustable desk width. Non-skid rubber pads.

K&M 48240 | Stålrack 12U, ca. 430mm dyb

310-00023
Sturdy steel 19" rack with rack rails on the front and back side. 12 spaces. Appr. 430 mm deep.

K&M 48240 | Stålrack 8U, ca. 430mm dyb

310-00024
Sturdy steel 19" rack with rack rails on the front and back side. 8 spaces. Appr. 430 mm deep.

K&M 48260 | Stålrack med skrå front, 16U

310-00022
Sturdy steel 19" rack with rack rails on the front and back side. Sloped front. 16 spaces, 425 mm deep at the top, H: 840 mm, at the bottom 561 mm deep. 4 casters are included.

K&M 48260 | Stålrack med skrå front, 21U

310-00021
Sturdy steel 19" rack with rack rails on the front and back side. Sloped front. 21 spaces, 390 mm deep at the top, H: 1070 mm. At the bottom 561 mm deep. 4 casters are included.
Close
Filter by Clear All
Varegrupper
Filters
Sort
display