Vis som Gitter Liste
Sorter efter

BSS BLU-DA - BLU-link til Dante/AES67, 64x64 kanaler

720-19010
The Soundweb London BLU-DA offers Dante / AES67 audio and BLU link. This means that the BLU-DA can be used to ‘add’ Dante / AES67 to one or more BLU link devices. The BLU-DA is configurable through HiQnet™ Audio Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. The BLU-DA features Dante and AES67 audio. The BLU-DA is capable of simultaneously transmitting and receiving up to 64 channels of Dante or AES67 audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port. The BLU-DA also includes support for Dante 4.0 firmware for integration with Dante Domain Manager. The BLU-DA also features BLU link, a low latency, fault tolerant digital audio bus of 256 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect. The BLU-DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution. This signal processor is EN 54-16 Compliant for life safety applications.

BSS BLU-GPX GPIO Expander med 36 control inputs og 23 logik outputs

720-19012
The Soundweb London BLU-GPX is a network-controlled GPIO expander which facilitates the cost-effective addition of Control Inputs, Logic Outputs, and Relays to systems requiring extra analog control/interfacing capability. The BLU-GPX features the same rich palette of Logic Objects found in other Soundweb London devices, two PoE-enabled Ethernet ports for communications and primary power, a 12VDC power connector for secondary power, a RS-232 port for compatibility with serial devices, a bank of user-configurable front panel LEDs, a user-configurable front panel LCD, a user-configurable piezo buzzer for audible indication, and locate functionality. The BLU-GPX has 36 Control Inputs. As with the Control Inputs found on other Soundweb London devices, these Control Inputs can be connected to contact closures for controlling binary parameters, resistor ladders for controlling multi-state parameters, or potentiometers for controlling continuous parameters. The BLU-GPX has 23 Logic Outputs. As with the Logic Outputs found on other Soundweb London devices, these Logic Outputs can be connected directly to voltage-controlled electrical components such as LEDs and relays.

BSS BLU-USB audio/BLU Link interface

720-19016
BSS USB - USB Audio to BLU link Interface. Få lyden direkte fra din PC ind på BLU Link audio bussen. Simpel integration af lyd fra computere til lydsystemet. Digital konvertering direkte til BLU link. Mange monteringsmuligheder .

BSS-BLU-HIF Soundweb London Telephone Headset Interface

720-19013
The BSS Audio BLU-HIF Telephone Headset Interface facilitates connection of the headset jack of a VoIP/digital phone to an AEC input and analog output of a Soundweb London device. The BLU-HIF therefore allows the VoIP/digital phone to be used as the dialing interface and hybrid for a conference system. This simple interface eliminates the programming requirements associated with third-party control systems, while providing a familiar and low-cost dialing interface to the end user. The BLU-HIF features an RJ-22 jack for connection to the headset jack of a VoIP/digital phone, a balanced input (Tx) for sending near-side audio, and a balanced output (Rx) for receiving far-side audio. While the BLU-HIF provides substantial isolation of the Rx and Tx signals, near-side audio will still be heard on the Rx channel due to the presence of side-tone. As such, BSS Audio recommends always feeding the Rx channel to an AEC input, as opposed to a standard analog input. The AEC algorithm will remove the side-tone. The Tx channel connects to a standard analog output. The wiring configuration within the headset jack of a VoIP/digital phone often differs, depending on the manufacturer. The BLU-HIF comes with two cables whose 4P4C RJ-22 connectors are compatible with the two most common wiring configurations found in the headset jack of VoIP/digital phones. The additional 2.5mm jack facilitates connection of two-way communication devices such as cellular phones to the Soundweb London device. This gives the end user the advantage of having an alternate communication path to the outside world, which is particularly useful as a backup to the main phone system.

Rack mount kit BLU-BIB/BLU-BOB

720-19015
The BSS Audio 1U Rack-Mount Kit allows up to two half-rack Soundweb London devices—BLU-BIB and BLU-BOB1—to be mounted on a shelf occupying a single rack space. The 1U Rack-Mount Kit can accommodate one BLU-BIB device, one BLU-BOB1 device, two BLU-BIB devices, two BLU-BOB1 devices, or one of each device. With each device offering eight channels of analog I/O expansion, the 1U Rack-Mount Kit allows for higher I/O density (16 channels) in a single rack space. For instances in which only one I/O expander is mounted, the included half-rack blanking plate can be used to fill the blank space in the front of the rack.

Relæ Panel 5VDC - 2 Channel

581-00001
Relæ Panel 5VDC - 2 Channel

Relæ Panel 5VDC - 6 Channel

581-00002
Relæ Panel 5VDC - 6 Channel
Filters
Sort
display