König & Meyer

Extra low design for bass drums or special use. Die-cast base with folding legs. Comes complete with boom arm.

Extra low design for bass drums or special use. Very short and heavy legs provide maximum stability. Legs are foldable for easy transport. Comes with two-piece boom arm.

Low profile round-base mic stand with telescopic boom arm, designed for bass drums and acoustic instruments. Heavy cast-iron round base, with anti-vibration rubber insert for noise filtration.

Heavy cast-iron round base, with anti-vibration rubber insert for noise filtration, plastic clutch-style height-adjustment system.

Heavy cast-iron round base, with anti-vibration rubber insert for noise filtration, plastic clutch-style height-adjustment system.

Sturdy carrying case for 3 microphone stand with round base. Tearproof nylon material, water-resistant. The case comes with padded handles and an adjustable shoulder strap. Plastic rubber feet protect the bottom of the case. 3 separate internal compartments and fixed Velcro strips provide maximum protection for the stands.

With the unique »Soft-Touch« one-hand clutch the height can be adjusted with a quick squeeze to easily raise and lower the mic. Sleek, flat, cast-iron base is very stable and durable. Quality black powder coating is extremely durable.

The new star in your show! The avant-garde, one-hand microphone stand is setting new standards in design and function. The elegant combination of triangular-shaped sections and the new design of the slender one-hand adjustment mechanism go harmoniously with standard microphone clips and microphones. The integrated knurled screw is impossible to lose and makes tightening and positioning the microphone clip easy. The stand’s simple elegance loses nothing by the addition of König & Meyer’s classic swivel arm. The height of the stand can be adjusted soundlessly, simply and easily using the unique one-hand clutch. The stand is significantly lightweight, but nonetheless stable due to the ingenious round base with an integrated steel plate with an attractive plastic cover. The base’s circumferential rubber profile reduces undesirable vibration and footfall noise even when the stand is tilted far over to the side. Damage to flooring (e.g. parquet) is also prevented.

Functional floor stand for near-field monitors and speakers. The solid and well-designed steel construction impresses with its enormous stability and holds your speakers securely in the desired position. The flat tripod construction with large rubber pads ensures acoustic decoupling and a wobble-free stand. The support plate with self-adhesive rubber studs measures 205 x 245 mm. For the optimal listening height, you can choose six levels between 677 and 1132 mm. The slim clamp with safety hook is easy and comfortable to use. Alternatively, the cables can be routed inside the tube (without connector). A load capacity of 35 kg is possible when the load is centred.

A decorative space saving speaker stand. The heavy cast iron plate with a relatively small diameter requires little space. The tried-and-tested spring-loaded bolt with locking screw makes height adjustment easy and safe. The stand has a maximum pull-out height of 1800 mm and is suitable for speakers with a maximum weight of 30 kg. The integrated mounting aid simplifies mounting the loud speaker cabinets.

Stable steel stand for monitors with broad completely level round cast-iron base-diameter 450 mm. Rod combination height adjustable using clamping screw and safety splint. For the direct attachment of monitors with 3/8" threaded joint (thread length 12 mm) or to screw in a connector plate 205 x 245 mm for Genelec monitor 1030 or monitors by other manufacturers. Includes 4 thread points and 4 rubber knobs.

Space-saving speaker stand with a large, flat cast-iron base (ø 450 mm). The solid steel construction impresses with its stability and supports speakers weighing up to 35 kg when the load is centred. For optimal sound reinforcement height, 100 mm steps can be set between 930 and 1430 mm. The slim clamp with safety hook is easy and comfortable to use. The end tube has a diameter of 35 mm and is therefore suitable for all corresponding flange bushings. The range of applications can be extended with a variety of accessories such as a projector tray (26747), mounting adapter (19580), etc.

Height-adjustable desktop stand for near-field monitors. The solid metal construction with the large support plate (205 x 245 mm) is suitable for a wide range of monitors and other equipment in the same size range. Four felt-covered support pads provide decoupling under the base plate. The individual height can be adjusted in 6 steps between 350 and 500 mm. In terms of load capacity, the stand can be centrally loaded up to 25 kg. Rubber pads are included for secure, noise-insulating support of the monitors

Height-adjustable desktop stand with tilt support. The solid metal construction with the large support plate (230 x 250 mm) is suitable for a wide range of monitors and other equipment in the same size range. The plate can be continuously tilted up to 12.5° and can be moved to optimise the centre of gravity. A stop bar ensures the necessary safety and prevents the monitor from slipping. Four felt-covered support pads provide decoupling under the base plate. The individual height can be adjusted in 4 steps between 350 and 450 mm. In terms of load capacity, the stand can be centrally loaded up to 25 kg. Rubber pads are included for secure, noise-insulating support of the monitors.

Height-adjustable monitor stand with table clamp for near-field monitors. The solid metal construction with the large support plate (205 x 245 mm) is suitable for a wide range of monitors and other equipment in the same size range. A practical table clamp allows it to be attached to tabletops with a thickness of 10 to 52 mm. The individual height adjustment is possible in 6 steps between 335 and 485 mm. In terms of load capacity, a centric load of up to 25 kg is possible. The support plate can be rotated 360° for perfect alignment. Rubber pads are included for secure, noise-insulating support of the monitors

Height-adjustable monitor stand with table clamp for near-field monitors. The solid metal construction with the large support plate (230 x 250 mm) is suitable for a wide range of monitors and other equipment in this size range. The plate can be tilted continuously up to 12.5° and moved to optimise the centre of gravity. A stop bar ensures the necessary safety and prevents the monitor from slipping. The practical table clamp enables attachment to tabletops with a thickness of 10 to 52 mm. The individual height can be adjusted in 4 steps between 335 and 435 mm. In terms of load capacity, a centric load of up to 25 kg is possible. The support plate can be rotated 360° for perfect alignment. Rubber pads are included for secure, noise-insulating support of the monitors.

This stable elegant stand has a 420 x 420 mm cast base with an oversized rod combination. Gradual height adjustment is made by a superior positioning and clamping knob. Quick, uncomplicated mounting of the monitor is accomplished using the suspension device.

Impressive steel stand for monitors with stable, elegant cast base 480 x 480 mm. The large-dimensioned tube combination is gradually height adjustable by means of a spring-loaded clamping knob from 644 to 1044 mm. Depending on the size of the monitor, three different bearing plates 26792 can be mounted.

Bearing plate for monitors, suitable for the design monitor stand 26795. Includes 4 spikes and 4 rubber knobs